Getting Started with WiPy

Questions and discussion about The WiPy 1.0 board and CC3200 boards.
Target audience: Users with a WiPy 1.0 or CC3200 board.
Post Reply
gurpal
Posts: 2
Joined: Fri Oct 28, 2016 9:01 am

Getting Started with WiPy

Post by gurpal » Fri Oct 28, 2016 9:13 am

Hi All,

Just wanted to share a Getting Started with WiPy blog post I created to help new users get up to speed with setting up WiPy.

http://www.mesh-net.co.uk/getting-started-wipy/

Feedback good and bad will be much appreciated. :)

Thank you,

Gurpal

jgmdavies
Posts: 57
Joined: Tue Aug 09, 2016 2:39 pm

Re: Getting Started with WiPy

Post by jgmdavies » Fri Oct 28, 2016 9:41 am

Thanks Gurpal, I'm sure that will help newcomers.

Maybe you could clarify in the blog post that it's WiPy 1.0 you're describing?

Best,
Jim

gurpal
Posts: 2
Joined: Fri Oct 28, 2016 9:01 am

Re: Getting Started with WiPy

Post by gurpal » Fri Oct 28, 2016 9:44 am

Hi Jim,

Yes you are right - should be more specific - I have now updated the title accordingly. :)

Thanks,

jgmdavies
Posts: 57
Joined: Tue Aug 09, 2016 2:39 pm

Re: Getting Started with WiPy

Post by jgmdavies » Fri Oct 28, 2016 10:27 am

Thanks Gurpal!

Post Reply