Page 1 of 1

ST SensorTile kit

Posted: Sat Dec 31, 2016 12:18 pm
by shaoziyang
I have add ST SensorTile kit support to micropython, REPL works fine, but LED (PG12) is not work. I will do more test soon.

ST SensorTile kit introduction:
http://www.stmicroelectronics.com.cn/co ... t01v1.html
SENSORTILE_board_support.ZIP
(4.68 KiB) Downloaded 292 times

Re: ST SensorTile kit

Posted: Mon Jan 09, 2017 6:07 pm
by photoacoustic
Nice job. Thanks!

Re: ST SensorTile kit

Posted: Mon Jan 09, 2017 6:26 pm
by dhylands
My first guess (as to why the LED isn't working) is that you need to enable the clock for PortG.

Re: ST SensorTile kit

Posted: Tue Jan 10, 2017 1:22 am
by shaoziyang
dhylands wrote:My first guess (as to why the LED isn't working) is that you need to enable the clock for PortG.
Yes, it need enable PortG clock, and VddIO2.

Code: Select all

            __HAL_RCC_SYSCFG_CLK_ENABLE();
            __HAL_RCC_PWR_CLK_ENABLE();
            __HAL_RCC_GPIOG_CLK_ENABLE();
            HAL_PWREx_EnableVddIO2();

Re: ST SensorTile kit

Posted: Tue Jan 10, 2017 5:32 pm
by Turbinenreiter
The only company that has stock won't ship it to me because of US trade restrictions. Even ST themselves can't ship it to me because of that.

ST is an European company.

What the hell.

Re: ST SensorTile kit

Posted: Tue Jan 10, 2017 5:45 pm
by dhylands
I've found it in stock through Digikey.ca and mouser.com (I'm in Canada). The very bottom of this page (in the Sample & Buy section)
http://www.st.com/en/evaluation-tools/s ... t01v1.html also has a "Buy Direct" button and a "Distributor Availability" button. Clicking on the distributor availability shows 2 distributors in Europe with stock.