Hi,
Just made kicad files for pyboard v1.1 to make a shield.
I am new to kicad, so might not be perfect. Any advice welcome !
Kicad files > shield
Kicad files > shield
- Attachments
-
- pyboard.zip
- (2.02 KiB) Downloaded 423 times
- FraggaMuffin
- Posts: 9
- Joined: Sat Nov 11, 2017 1:10 am
- Location: Melbourne, Australia
- Contact:
Re: Kicad files > shield
Thanks bibile!
I put that straight in to one of my projects, it saved me from making it myself.
2 cosmetic improvements I can see:
- Fill rectangle's background
- Y6: label "CANTX" should be "CANTX2"
I'm new to KiCAD too, so when it comes to practical advice for pin types & other parameters... I have no idea.
But no worries! You've got almost 2 years experience now
I put that straight in to one of my projects, it saved me from making it myself.
2 cosmetic improvements I can see:
- Fill rectangle's background
- Y6: label "CANTX" should be "CANTX2"
I'm new to KiCAD too, so when it comes to practical advice for pin types & other parameters... I have no idea.
But no worries! You've got almost 2 years experience now