New OpenMV board
New OpenMV board
The guys over at https://openmv.io have just announced an updated, Cortex-M7 based openmv module. The camera chip is the same.
They made it 20$ cheaper for preorders, resp. 10$ less for normal orders. That's great news.
It's not yet funded. The expected market launch is in march.
They made it 20$ cheaper for preorders, resp. 10$ less for normal orders. That's great news.
It's not yet funded. The expected market launch is in march.
Re: New OpenMV board
That's a great news. I have the first OpenMV board (and an earlier prototype from the fire sale), and it works as advertised. And they keep on adding new algorithms to it.
I have two projects with them, but they are both paused at the moment. I think I should really give them some more attention.
I have two projects with them, but they are both paused at the moment. I think I should really give them some more attention.
Re: New OpenMV board
thanks for a link. just pre-ordered 2 of them )
Re: New OpenMV board
the only question is... are they going to use 1.8+ micropython or still an outdated 1.4
- rcolistete
- Posts: 352
- Joined: Thu Dec 31, 2015 3:12 pm
- Location: Brazil
- Contact:
Re: New OpenMV board
Are there any public MicroPython firmware files for OpenMV boards ?
My "MicroPython Samples". My "MicroPython Firmwares" with many options (double precision, ulab, etc).
Re: New OpenMV board
The firmware files are included with the IDE downloads. There is also a public repository, so you can build your own.
Re: New OpenMV board
You can find the openmv repositories here: https://github.com/openmv
- rcolistete
- Posts: 352
- Joined: Thu Dec 31, 2015 3:12 pm
- Location: Brazil
- Contact:
Re: New OpenMV board
v1.8.x is confirmed, see "MicroPython version" topic in OpenMV forum.kamikaze wrote:the only question is... are they going to use 1.8+ micropython or still an outdated 1.4
My "MicroPython Samples". My "MicroPython Firmwares" with many options (double precision, ulab, etc).
- rcolistete
- Posts: 352
- Joined: Thu Dec 31, 2015 3:12 pm
- Location: Brazil
- Contact:
Re: New OpenMV board
Thanks. I've installed OpenMV IDE (on Linux) and the firmware is in "~/openmvide/share/qtcreator/firmware", for "OMV2" (STM32F427) and new "OMV7" (STM32F769) OpenMV boards.deshipu wrote:The firmware files are included with the IDE downloads. There is also a public repository, so you can build your own.
And the OpenMV IDE seems to be well polished, with full of examples in "File -> Examples" in 15 categories.
- Attachments
-
- OpenMV_IDE_Examples.png (220.28 KiB) Viewed 9341 times
My "MicroPython Samples". My "MicroPython Firmwares" with many options (double precision, ulab, etc).
Re: New OpenMV board
I think these guys and their project need more support in informational field. There is a lack of info and ignoring from different companies like Adafruit, SparkFun etc. This is very sad because it's a very nice project in MicroPython world.
http://forums.openmv.io/viewtopic.php?f=4&t=184
http://forums.openmv.io/viewtopic.php?f=4&t=184