Can anyone help me for CC3200LAUNCHXL Micropython porting?
I followed Ti/WiKi page guidelines for porting.
1. Successfully generated bootloader file.
2. Started mcumg.bin generation but failed in between and stuck up at the pins.h build then build it with python code.
3. Again error generated for mpversion.h build then build it with python but after making application it shows the same mpversion.h error and could not proceed after it. Struggling on it for last 3days tried many thing like uninstall/install micropython/Cygwin also.
Iam using - micropython-1.12/micropython-master
windows 64
cygwin
below is the screen code for same.
Code: Select all
Lenovo@DESKTOP-0GNP05U ~
$ cd e:/micropython
Create bootmgr/build/LAUNCHXL/release/bootloader.bin
Relocator found...
Boot Manager found... Generating bootloader...
Lenovo@DESKTOP-0GNP05U /cygdrive/e/micropython-master/ports/cc3200
$ make BTARGET=application BTYPE=release BOARD=LAUNCHXL
Use make V=1 or set BUILD_VERBOSE in your environment to increase build verbosity.
Create build/LAUNCHXL/release/genhdr/pins.h
bash: python3: command not found
application.mk:236: recipe for target 'build/LAUNCHXL/release/genhdr/pins.h' failed
make: *** [build/LAUNCHXL/release/genhdr/pins.h] Error 127
Lenovo@DESKTOP-0GNP05U /cygdrive/e/micropython-master/ports/cc3200
$