Are there any examples of how to set pins as outputs and then configure them to low or high.
I would certain pins on the STM32 to be set as outputs and set low on startup.
Any help is appreciated.
Harry
Sent from my iPhone using Tapatalk
Search found 18 matches
- Sat Oct 24, 2020 1:33 pm
- Forum: MicroPython pyboard
- Topic: Initialising GPIO’s in the Hal file or boot.Pty file?
- Replies: 1
- Views: 1596
- Fri Oct 23, 2020 3:49 pm
- Forum: Development of MicroPython
- Topic: Micropython Build Step by Step
- Replies: 4
- Views: 2946
Re: Micropython Build Step by Step
Hi Again,
Is there a way to set a GPIO pin to 1 or 0 in the HAL configuration file?
I have a regulator that is turned on or off using an output pin and i would like to have the firmware pre define that pin to 0 so on startup the regulator is off.
Thanks,
Harry
Is there a way to set a GPIO pin to 1 or 0 in the HAL configuration file?
I have a regulator that is turned on or off using an output pin and i would like to have the firmware pre define that pin to 0 so on startup the regulator is off.
Thanks,
Harry
- Tue Oct 13, 2020 11:07 am
- Forum: Development of MicroPython
- Topic: Micropython Build Step by Step
- Replies: 4
- Views: 2946
- Fri Oct 09, 2020 2:11 am
- Forum: Development of MicroPython
- Topic: Micropython Build Step by Step
- Replies: 4
- Views: 2946
Micropython Build Step by Step
Hi All, Are there step by step instructions on building a .dfu file for an STM32 custom board? *edit. I have Ubuntu 18 installed on a virtual machine for this. 1. Install Ubuntu on virtual box 2. Sudo apt-get install git 3. Sudo apt-get install screen 4. Git clone https://github.com/micropython/micr...
- Thu Oct 08, 2020 11:30 pm
- Forum: Development of MicroPython
- Topic: Getting Started with STM32
- Replies: 5
- Views: 3829
Re: Getting Started with STM32
I have been having all sorts of trouble trying to get the build to work. Can you share a brief guid on how you did it with Ubuntu 18?
- Wed Jan 16, 2019 2:20 am
- Forum: Hardware Projects
- Topic: How do you configure MicroPython for a custom board?
- Replies: 11
- Views: 73582
Re: How do you configure MicroPython for a custom board?
Thank you for the information, ill give it a go.
- Mon Jan 14, 2019 5:43 am
- Forum: Hardware Projects
- Topic: How do you configure MicroPython for a custom board?
- Replies: 11
- Views: 73582
Re: How do you configure MicroPython for a custom board?
I am using the STM32F405RGT6, the same as the PyBoard 1.0. I changed the accelerometer and added some modules.
- Thu Jan 10, 2019 12:50 am
- Forum: Hardware Projects
- Topic: How do you configure MicroPython for a custom board?
- Replies: 11
- Views: 73582
How do you configure MicroPython for a custom board?
Hi All,
Apologies if this question has been answered already, I have a custom board that is being built and i would like to prepare a custom micropython fimware for it. Is there any documentation or guidance available on how to do this?
Thank you in advance,
Harry
Apologies if this question has been answered already, I have a custom board that is being built and i would like to prepare a custom micropython fimware for it. Is there any documentation or guidance available on how to do this?
Thank you in advance,
Harry
- Tue Jan 08, 2019 3:01 am
- Forum: Other Boards
- Topic: How to port Micropython to new Microcontroller
- Replies: 13
- Views: 13867
Re: How to port Micropython to new Microcontroller
Have you had any luck finding out how to port Micropython to a new micro controller / custom board? I want to do the same thing.
- Fri Mar 17, 2017 1:07 am
- Forum: Drivers for External Components
- Topic: LSM9DS1 9DOF gyro
- Replies: 5
- Views: 6869
Re: LSM9DS1 9DOF gyro
Apologies for the noob question. Is this class usable on the micropython board attached to a LSM9DS1 sensor board?