So I've been having trouble connecting to the webrepl while the Pyboard D is busy in the main program.
If webrepl is asynchronous then perhaps I need to make my main program asynchronous.
This could potentially allow access to webrepl?
Can someone verify if my logic is correct?
Search found 31 matches
- Sat Nov 07, 2020 7:42 pm
- Forum: Pyboard D-series
- Topic: Is webrepl asynchronous?
- Replies: 0
- Views: 2632
- Sat Nov 07, 2020 2:13 pm
- Forum: Pyboard D-series
- Topic: unable to access webrepl when main script is running
- Replies: 14
- Views: 9943
Re: unable to access webrepl when main script is running
Can you elaborate a little?
What sort of delay are you talking about?
Do you have a link?
- Sat Nov 07, 2020 2:11 pm
- Forum: Pyboard D-series
- Topic: unable to access webrepl when main script is running
- Replies: 14
- Views: 9943
Re: unable to access webrepl when main script is running
750ms to read sensors sounds like a lot. Can you give more details on that? Jan So my Pyboard D is being used as a data logger for various sensors e.g. GPS, Temperature etc. The main loop functions like so: Sample Devices (2-3 minutes) Send Data (2 minutes) deep sleep for 10 minutes The deep sleep ...
- Sat Nov 07, 2020 2:15 am
- Forum: Pyboard D-series
- Topic: unable to access webrepl when main script is running
- Replies: 14
- Views: 9943
Re: unable to access webrepl when main script is running
Hi, sorry the time estimates were just an example. I tried all combinations of timing intervals. Different sleep times , but no success. My Data logger essentially works like this: Samples the sensors (takes 2 minutes) Send the data (takes about 3 minutes) Deep sleep for 5/10 minutes Repeat Like I s...
- Fri Nov 06, 2020 10:59 am
- Forum: Pyboard D-series
- Topic: unable to access webrepl when main script is running
- Replies: 14
- Views: 9943
Re: unable to access webrepl when main script is running
So putting an input() statement works but hangs the entire device. So it's not a real solution to the problem. My project is a data logger that is located in a Marine environment, so having the pyboard D accessible by Wi-Fi would be hugely beneficial. Otherwise to access the device I need to open th...
- Fri Nov 06, 2020 9:24 am
- Forum: Pyboard D-series
- Topic: unable to access webrepl when main script is running
- Replies: 14
- Views: 9943
Re: unable to access webrepl when main script is running
I've found a way to access the webrepl using a timer callback like this: timer = Timer(-1) timer.init(period=1, mode=Timer.ONE_SHOT, callback=preSleep) for countdown in range(20,0,-1): print('Sleeping in ',countdown) time.sleep(1) machine.deepsleep(sleepTime) and my callback function is just this: d...
- Thu Nov 05, 2020 4:33 pm
- Forum: Pyboard D-series
- Topic: unable to access webrepl when main script is running
- Replies: 14
- Views: 9943
Re: unable to access webrepl when main script is running
Hi I've tried putting in a small sleep in every loop.
But until I kill the main process running I can't access the webrepl.
I can only enter a password, it won't accept it
Please help me if you can
But until I kill the main process running I can't access the webrepl.
I can only enter a password, it won't accept it
Please help me if you can
- Thu Nov 05, 2020 4:30 pm
- Forum: Pyboard D-series
- Topic: Connect to REPL over WI-Fi
- Replies: 5
- Views: 3726
Re: Connect to REPL over WI-Fi
Whatever you put in for SSID here:
The SSID is the Wi-Fi name that you'll see on your PC
Code: Select all
wl_ap.config(essid='SSID')
- Fri Oct 30, 2020 5:15 pm
- Forum: Pyboard D-series
- Topic: Pyboard Access Point doesn't ask for password to connect
- Replies: 4
- Views: 4147
Pyboard Access Point doesn't ask for password to connect
So I've used the code: import network wl_ap = network.WLAN(1) wl_ap.config(essid='PyboardD') # set AP SSID wl_ap.config(password='password') # set AP password wl_ap.config(channel=6) # set AP channel wl_ap.active(1) # enable the AP while True: #Do Stuff I can connect my laptop to the access point bu...
- Fri Oct 30, 2020 4:30 pm
- Forum: Pyboard D-series
- Topic: unable to access webrepl when main script is running
- Replies: 14
- Views: 9943
unable to access webrepl when main script is running
So I have a data logger running in a infinite loop with a few sensors attached to my Pyboard D. I want to be able to access the repl using webrepl. I'm only able to access webrepl when no code is being executed. webrepl won't let me log in if code is running. Due to the nature of my application I ca...