MicroPython Forum

Thanks again!!

Went through the code snippets in the link.

Thanks again!!

Let me give a quick try to capture this.

I will update the result once this error occur!!

Hello Everyone!! Please excuse me , if this question seems a bit foolish!! I am just trying to understand the memory management in MicroPython. As a part of it, I am putting this question here. What happens when I put bunch of print statements in my coroutines (I have nearly 10 coros running at diff...

Hi Maksym, Thanks for reply there!! I'm not sure about the particularity of the error. But all I could see is that the LED (on-board) toggle in a specific pattern(I have made the custom hardware have only one LED for indicating CPU heart-beat( which is actually RED Led in pyboard I mean the hardware...

Thanks Dave!! Got it working. Would like to present a scenario here. What actually happening was , for some reason, the memory space 0x08008000 got erased, hence the application didn't show up despite being loaded correctly. Now, I have write protected the boot-loader space as well as the ISR space ...

Dave, Thanks for the reply there!! Thank you so much for the clarity on this. I understand that I should not subtract '1' from the offset. But this doesn't seem to cause any exception as the processor remains silent after the jump statement is executed!! (behaves the same way even after removing '-1...

Hello Everyone!! I have got running micropython in my custom hw based on stm32.(As of now using pyb module completely) I have implemented uasyncio to run some coros so as to get data from different sensors at different time frames, amongst sending data to server. What happens is that the controller ...

Thanks again Dave for the clear picture!! I am always getting the Reset_Handler address +1 as a return value from the below. Hence I have manually compensated it by subtracting '1' from the value as below. This way, now the hw restarts infinitely and enters the bootloader again and again. This is wh...

Thank you so much Dave !! By the way, I have reached half-way, implementing a custom bootloader for my custom hw. I have my bootloader in 0x08000000 . This looks for a bin file in sd card on startup and if the fie is present , it erases the flash memory from 0x08020000 upto 11th sector (I'm using ST...

Thank you so much for the clarification!!