Search found 15 matches

by lolomarx
Fri Jan 10, 2020 1:09 am
Forum: ESP32 boards
Topic: How to config 2M flash for a new ESP32 board?
Replies: 6
Views: 714

Re: How to config 2M flash for a new ESP32 board?

Here are the code i perform: sudo /home/luke/esp/esp-idf-v3.3.1/components/esptool_py/esptool/esptool.py --chip esp32 --port /dev/ttyUSB0 --baud 2000000 write_flash -z 0xf000 build-GENERIC_D2WD/firmware.bin And the result here: esptool.py v2.8-dev Serial port /dev/ttyUSB0 Connecting..... Chip is ESP...
by lolomarx
Fri Jan 10, 2020 1:06 am
Forum: ESP32 boards
Topic: How to config 2M flash for a new ESP32 board?
Replies: 6
Views: 714

Re: How to config 2M flash for a new ESP32 board?

I had try to flash /build-GENERIC_D2WD/firmware.bin to my 2M esp32 board. It can flash and verified ok, but still boot on fail. rst:0x3 (SW_RESET),boot:0x13 (SPI_FAST_FLASH_BOOT) configsip: 0, SPIWP:0xee clk_drv:0x00,q_drv:0x00,d_drv:0x00,cs0_drv:0x00,hd_drv:0x00,wp_drv:0x00 mode:DIO, clock div:2 lo...
by lolomarx
Thu Jan 09, 2020 9:26 am
Forum: ESP32 boards
Topic: How to config 2M flash for a new ESP32 board?
Replies: 6
Views: 714

How to config 2M flash for a new ESP32 board?

I am follow the step from https://docs.espressif.com/projects/esp-idf/en/latest/api-reference/kconfig.html Perform below command on esp-idf folder : idf.py menuconfig And then meet problem : Unknow CMake command ‘idf_build_set_property’ And find no answer by google also. I flash the esp32-idf3-20191...
by lolomarx
Thu Jan 09, 2020 8:57 am
Forum: ESP32 boards
Topic: How to build BLE firmware with esp-idf-v4.x
Replies: 8
Views: 858

Re: How to build BLE firmware with esp-idf-v4.x

Thx , I use the old tools provided by you and then it pass.
by lolomarx
Wed Jan 08, 2020 8:12 am
Forum: ESP32 boards
Topic: How to build BLE firmware with esp-idf-v4.x
Replies: 8
Views: 858

How to build BLE firmware with esp-idf-v4.x

Herewith my action step for your reference: i download esp-idf-v4.0-beta1.zip from https://github.com/espressif/esp-idf/releases/tag/v4.0-beta1 And then perform : git submodule update --init --recursive Perform below code to install tools: ./install.sh Finally . $HOME/esp/esp-idf/export.sh So i comp...