Search found 88 matches
- Thu Oct 01, 2020 7:11 am
- Forum: Development of MicroPython
- Topic: [SOLVED] micropython-nano-gui on esp8266
- Replies: 8
- Views: 5091
[SOLVED] micropython-nano-gui on esp8266
Hello, everyone! If micropython-nano-gui from peterhinch. The web site is: https://github.com/peterhinch/micropython-nano-gui, If it suit porting to esp8266 chip. How much ram is needed? Thanks!
- Wed Aug 12, 2020 12:22 pm
- Forum: MicroPython pyboard
- Topic: multibutton and aswitch.py
- Replies: 3
- Views: 2318
Re: multibutton and aswitch.py
Hi, Follow this my code,the function is ok. class switch_ext: """ pb12 = Y5 Turn Right low effective byte1.bit0-bit1 Pb13 = Y6 Turn Left low effective byte1.bit2-bit3 Pb14 = Y7 Open door low effective byte1.bit4-bit5 pb15 = Y8 Turn Back low effective byte1.bit6-bit7 pc8 = SD_D0 Acc low effecive byte...
- Fri Jul 31, 2020 9:28 am
- Forum: MicroPython pyboard
- Topic: multibutton and aswitch.py
- Replies: 3
- Views: 2318
- Thu Jul 30, 2020 1:05 pm
- Forum: MicroPython pyboard
- Topic: multibutton and aswitch.py
- Replies: 3
- Views: 2318
multibutton and aswitch.py
Hello,I had used the aswitch.py to scan the switch press and release function. Follow this py file is scan multi switch function.Are there aswitch.py can scan two or more switch press at same time and read the switch value?Thanks! class switch_ext: """ pb12 = Y5 Turn Right low effective byte1.bit0-b...
- Tue Jul 21, 2020 12:17 pm
- Forum: MicroPython pyboard
- Topic: uncaught exception in CAN(1) rx interrupt handler
- Replies: 0
- Views: 1512
uncaught exception in CAN(1) rx interrupt handler
Hello, everyone! When the pc Can tools send multi Can Id data to PYBV11 Can Bus(1) every 2ms, all data received,the filter set: set_filters([(0, 0)]).But any issue shows are: "uncaught exception in CAN(1) rx interrupt handler" and "Exception: schedule stack overflow". As code:// The file from spacec...
- Mon Jul 06, 2020 11:54 am
- Forum: MicroPython pyboard
- Topic: Canbus Transceive Error
- Replies: 0
- Views: 1514
Canbus Transceive Error
Hello, I have two pyboards and commuicate with each other via CanBus. when them work receiver and sender simultaneously, only received four bytes each other. when this script single run and comunicate with PC tools ,it works well. How solve this issue. Thanks! A board: import pyb can = pyb.CAN(1, mo...
- Mon May 18, 2020 8:44 am
- Forum: Development of MicroPython
- Topic: CANBUS protocl
- Replies: 1
- Views: 1614
CANBUS protocl
Hi, everyone! If any CANBUS protocol be run pyboard with micropython language? Thanks!
- Tue May 05, 2020 2:11 pm
- Forum: General Discussion and Questions
- Topic: CanOpen
- Replies: 1
- Views: 3539
Re: CanOpen
Hi fma, I want to pyboard be communication with vehilce every node used CanOpen protocol.If you had any processing?There is CanOpen protocok with python3. https://pypi.org/project/canopen/ But Whether be suited for pyboard.
- Mon Apr 13, 2020 2:36 pm
- Forum: Programs, Libraries and Tools
- Topic: Guide to uasyncio V3
- Replies: 9
- Views: 5144
Re: Guide to uasyncio V3
@pythoncoder Thank you very much for you shared your code.I had been rebuilded the micropython firmware. how to porting to the uasyncio to the firmware.
- Fri Mar 20, 2020 6:53 am
- Forum: Programs, Libraries and Tools
- Topic: Btree error on openmv build
- Replies: 3
- Views: 2540
Re: Btree error on openmv build
Thank you jimmo.Yes, I had pult the submodule. The arm-none-eabi-gcc version is: gcc version 7.3.1 20180622 (release) [ARM/embedded-7-branch revision 261907] (GNU Tools for Arm Embedded Processors 7-2018-q3-update)