Quick reference for the WiPy

Questions and discussion about The WiPy 1.0 board and CC3200 boards.
Target audience: Users with a WiPy 1.0 or CC3200 board.
Post Reply
User avatar
Frida
Posts: 45
Joined: Sat Jan 30, 2016 2:20 pm
Location: Middelfart, Denmark

Quick reference for the WiPy

Post by Frida » Mon May 09, 2016 8:26 pm

In the "Quick reference for the WiPy", under "Pins and GPIO" the use of GP2 and GP1 is not good, because they are connected to UART0_RX and UART_TX on the expansionboard.
I was trying the example with GP2, and my communication via USB stopped.
Be carefull not to use GP1 and GP2, if you also uses the usb connection.
Yes Frida is my watchdog!
Top
Post Reply

Return to “WiPy and CC3200 boards”