CC3200-LAUNCHXL program problem

Questions and discussion about The WiPy 1.0 board and CC3200 boards.
Target audience: Users with a WiPy 1.0 or CC3200 board.
Post Reply
shaoziyang
Posts: 363
Joined: Sun Apr 17, 2016 1:55 pm

CC3200-LAUNCHXL program problem

Post by shaoziyang » Mon Sep 12, 2016 6:27 am

I have a CC3200-LAUNCHXL board, when I program firmware to board follow the README.md file description, it is not work after program.
- Add a new file with the name of /sys/mcuimg.bin, and select the URL to point to cc3200\bootmgr\build\<BOARD_NAME>\bootloader.bin.
- Add another file with the name of /sys/factimg.bin, and select the URL to point to cc3200\build\<BOARD_NAME>\mcuimg.bin.
Then I have only program file 'mcuimg.bin' as below, it works.
00.jpg
00.jpg (70.21 KiB) Viewed 3453 times
Top
catalin59
Posts: 1
Joined: Wed Sep 21, 2016 1:21 pm

Re: CC3200-LAUNCHXL program problem

Post by catalin59 » Wed Sep 21, 2016 1:25 pm

I have followed the instructions found here:
http://processors.wiki.ti.com/index.php ... hon_CC3200
and it worked very well for me.
Top
Post Reply

Return to “WiPy and CC3200 boards”