Page 1 of 1

GPIO irq callback problem

Posted: Sat Feb 25, 2017 12:05 pm
by Luit
Hi, I have exactly the same problem as described in

Here is my

import machine
import urequests
from machine import Pin

def pincb(pin):
url = "(my test url)"
params = { "test": "true" }
urequests.urlopen(url, "GET", params)

p_out = Pin('GP2', mode=Pin.OUT)
pin_int = Pin('GP1', mode=Pin.IN, pull=Pin.PULL_UP
pin_int.irq(trigger=Pin.IRQ_RISING, handler=pincb)

I know that the handler works perfectly, because I tested it with telnet and my website's access logs. But for some reason when I connect GP2 and GP1 the red light starts to blink rapidly for a couple of seconds. After that nothing happens when I connect the two pins until I restart the WiPy.

Re: GPIO irq callback problem

Posted: Sun Feb 26, 2017 8:43 am
by pythoncoder
Testing a function from the REPL doesn't prove it will work as an interrupt handler. I suggest you read ... rules.html.

The way to proceed is to have the interrupt handler set a flag which is tested in a main loop which runs forever. When the flag is set the main loop calls your handler and clears it.