[STM32H753] SPI Clock - Idle remains High

Discussion and questions about boards that can run MicroPython but don't have a dedicated forum.
Target audience: Everyone interested in running MicroPython on other hardware.
Post Reply
equintero
Posts: 1
Joined: Tue Oct 06, 2020 8:51 pm

[STM32H753] SPI Clock - Idle remains High

Post by equintero » Fri Nov 19, 2021 1:32 am

Hello!
I'm running into issues with SPI1 and SPI4 clk.
It is my understanding that the clock should remain low during idle if polarity = 0.
This is not what I am seeing. The clock is high at idle. Any ideas?
Image
Thanks

Post Reply