Port to Nucleo-F746ZG and Nucleo-F767ZI board

Discussion and questions about boards that can run MicroPython but don't have a dedicated forum.
Target audience: Everyone interested in running MicroPython on other hardware.
Post Reply
shaoziyang
Posts: 275
Joined: Sun Apr 17, 2016 1:55 pm

Port to Nucleo-F746ZG and Nucleo-F767ZI board

Post by shaoziyang » Sun Jul 31, 2016 1:32 pm

I have port micropython to Nucleo-F746ZG and Nucleo-F767ZI board, it is work fine in these board. It base on STM32F&DISC board.

mahmud
Posts: 9
Joined: Fri Feb 03, 2017 8:14 pm

Re: Port to Nucleo-F746ZG and Nucleo-F767ZI board

Post by mahmud » Sat Feb 25, 2017 7:17 pm

Can u please upload the firmware.bin or .hex file, so that we can burn it on our board too.

Thanks in advance.

Dllanes
Posts: 4
Joined: Tue Apr 09, 2019 12:31 pm

Re: Port to Nucleo-F746ZG and Nucleo-F767ZI board

Post by Dllanes » Tue Apr 09, 2019 1:36 pm

Hello,

have you ever tryied to measure an analog value with these boards ? it seems that it is not working properly.
I get the error "ValueError: pin A3 does not have ADC capabilities"
Do you know how can I face this issue?

thanks

Post Reply