Page 1 of 2

STM32L476 Nucleo Board

Posted: Fri Sep 02, 2016 9:38 am
by ajie_dirgantara
Hi All,

1. Is there any support for this particular board? Currently I've been compile and flash the STM32L476DISC to the nucleo board. Can I use this a a starting point?

2. in STM32L476DISC mpconfigboard.h, the USB options is commented out, how can I copy my .py files?

Thanks,

Re: STM32L476 Nucleo Board

Posted: Fri Sep 02, 2016 4:36 pm
by dhylands
The normal way is that you do this is create a new board directory, copy the files from another board that's close and edit the files.

The biggest change is typically in the pins.csv file.

One of the more critical things to check is the crystal frequency. If the STM32L476DISC is working then that's probably the same.

The only USB thing I see thats commented out is the ID pin, which is only used for OTG.

Re: STM32L476 Nucleo Board

Posted: Sat Sep 03, 2016 2:03 am
by shaoziyang
ajie_dirgantara wrote:Hi All,

1. Is there any support for this particular board? Currently I've been compile and flash the STM32L476DISC to the nucleo board. Can I use this a a starting point?

2. in STM32L476DISC mpconfigboard.h, the USB options is commented out, how can I copy my .py files?

Thanks,
I have port Nucleo_L476RG board, it works fine.

Nucleo_L476RG has no usb connector for microcontroller, so PYBFlash disk can't be used. But your can connect usb pins in NUCLEO board to a usb connector, then PYBFlash disk can be used.
0.jpg
0.jpg (88.48 KiB) Viewed 11137 times
firmware_NUCLEO_L476RG.zip
binary firmware
(186.34 KiB) Downloaded 407 times
board_NUCLEO_L476RG.ZIP
board define file
(5.21 KiB) Downloaded 396 times

Re: STM32L476 Nucleo Board

Posted: Sat Sep 03, 2016 2:04 am
by shaoziyang
I have also make expansion board, make it easy to use USB and sdcard.
1.jpg
1.jpg (111.61 KiB) Viewed 11135 times
2.jpg
2.jpg (100.86 KiB) Viewed 11135 times
4.jpg
4.jpg (63.12 KiB) Viewed 11135 times

Re: STM32L476 Nucleo Board

Posted: Fri Oct 07, 2016 11:32 am
by photoacoustic
Dear shaoziyang,
Your expansion board is very interesting.
Can you share the design? or where to buy it.
Thanks in advance
Arouna

Re: STM32L476 Nucleo Board

Posted: Fri Oct 07, 2016 1:02 pm
by shaoziyang
photoacoustic wrote:Dear shaoziyang,
Your expansion board is very interesting.
Can you share the design? or where to buy it.
Thanks in advance
Arouna
Yes, my design is free. Below is schematic (pdf format), full design file is too large to upload. if you need it, please tell me your email.

I have make several blank boards for myself, if you pay freight, I will send you one.
sch.zip
(97.63 KiB) Downloaded 387 times

Re: STM32L476 Nucleo Board

Posted: Sun Oct 16, 2016 4:38 pm
by photoacoustic
Dear shaoziyang,
Thanks. Yes I am interested.
My mail : ardarga@gmail.com
Send me an email for the blanck boards.
Best regards
Arouna

Re: STM32L476 Nucleo Board

Posted: Tue Sep 12, 2017 2:28 pm
by Dylan144GT
[quote="shaoziyang"][quote="photoacoustic"]Dear shaoziyang,
Your expansion board is very interesting.
Can you share the design? or where to buy it.
Thanks in advance
Arouna[/quote]

Yes, my design is free. Below is schematic (pdf format), full design file is too large to upload. if you need it, please tell me your email.

I have make several blank boards for myself, if you pay freight, I will send you one.

sch.zip[/quote]

Hello Shaoziyang,

I would be interested in one of you pyBoard expansion boards for the STM32L476 Nucleo. Do you have any available? If so, please can you send me an email: earthtoreyn at gmail.

Thanks,

Dylan

Re: STM32L476 Nucleo Board

Posted: Wed Sep 13, 2017 2:19 am
by shaoziyang
Dylan144GT wrote: Hello Shaoziyang,

I would be interested in one of you pyBoard expansion boards for the STM32L476 Nucleo. Do you have any available? If so, please can you send me an email: earthtoreyn at gmail.

Thanks,

Dylan
Do you need a expansion board?

Re: STM32L476 Nucleo Board

Posted: Wed Sep 13, 2017 6:02 am
by Dylan144GT
Yes please, that would be great. Depending on cost of course. :-)