My LoPy board arrived

All ESP32 boards running MicroPython.
Target audience: MicroPython users with an ESP32 board.
User avatar
bmarkus
Posts: 111
Joined: Tue Oct 21, 2014 5:58 am

Re: My LoPy board arrived

Post by bmarkus » Fri Oct 21, 2016 8:33 pm

Well, after updating LoPy to fw 0.9.1.b1 today it is crashing in 10 seconds after reset/boot without running any user program, just the stock boot.py It means can't connect to it via WiFi anymore.

Previous release was able to blink LED for 3 days.

:? :cry:
Tiny Core Linux (piCore) developer
HAM radio call: HA5DI (Béla)

User avatar
bmarkus
Posts: 111
Joined: Tue Oct 21, 2014 5:58 am

Re: My LoPy board arrived

Post by bmarkus » Sat Oct 22, 2016 12:11 am

Strange enough, after disconnecting power for few hours it works again.
Tiny Core Linux (piCore) developer
HAM radio call: HA5DI (Béla)

User avatar
pythoncoder
Posts: 5956
Joined: Fri Jul 18, 2014 8:01 am
Location: UK
Contact:

Re: My LoPy board arrived

Post by pythoncoder » Sat Oct 22, 2016 6:10 am

Alas given the closed source nature of the thing you're dependent on support from Pycom on this one. Good luck.
Peter Hinch
Index to my micropython libraries.

Post Reply