[STM32F103] - Porting MicroPython to the "BluePill" board

Discussion and questions about boards that can run MicroPython but don't have a dedicated forum.
Target audience: Everyone interested in running MicroPython on other hardware.
User avatar
dhylands
Posts: 3465
Joined: Mon Jan 06, 2014 6:08 pm
Location: Peachland, BC, Canada
Contact:

Re: [STM32F103] - Porting MicroPython to the "BluePill" board

Post by dhylands » Tue Sep 15, 2020 2:49 pm

The readme says
Use stm32loader.py using the UART bootloader to flash usbdfu.bin
.

As simple as what you want, even the minimal micropython is around 70K IIRC

bellad
Posts: 83
Joined: Tue May 14, 2019 1:47 pm

Re: [STM32F103] - Porting MicroPython to the "BluePill" board

Post by bellad » Tue Sep 15, 2020 2:57 pm

ok thank you,
according to you , what program can I use
i see basic https://github.com/Miskatino/miskatino-basic
What do you think ?

User avatar
dhylands
Posts: 3465
Joined: Mon Jan 06, 2014 6:08 pm
Location: Peachland, BC, Canada
Contact:

Re: [STM32F103] - Porting MicroPython to the "BluePill" board

Post by dhylands » Tue Sep 15, 2020 4:27 pm

It looks like the the basic that you linked is supported on the BluePill. I've never used it before, so I can't really comment on it.

Post Reply