Re: Teensy 4.0 & 4.1
Posted: Thu Oct 14, 2021 3:08 pm
Not yet. It's on the list of planned modules.
Please see the new forum at
https://forum.micropython.org/
@loboris: Do you mind if I add this script and the related Freescale executables to the Pull Request for the ARCH MIX board?I've prepared a simple script to upload the built MicroPython firmware (firmware.bin) to the board. It can be simply used by executing:
You can add it, of course.
That's indeed interesting. There is already a Zephyr port for mimxrt boards. You might have noticed it.BTW, I've finished the FreeRTOS version of the mimxrt port which has many advantages on such a powerful microprocessor.
It works great (as far as I've tested it). I'll give some more details after some more testing...
If someone is actively working on I2S for the Teensy I can offer to help them with the implementation. I did the I2S implementation for the Pyboards, ESP32, just recently the Pico. If no-one has started the work, I could take it on.
That would indeed be fine. Please make use of the nxp-driver lib. Examples can be found in the NXP SDK for the respective MCU. You can download it from the NXP web site. https://www.nxp.com/design/software/dev ... presso-SDKIf someone is actively working on I2S for the Teensy I can offer to help them with the implementation.
Thanks, look forward to your results! Please post updates.Mike Teachman wrote: ↑Mon Oct 25, 2021 1:41 pmIf someone is actively working on I2S for the Teensy I can offer to help them with the implementation. I did the I2S implementation for the Pyboards, ESP32, just recently the Pico. If no-one has started the work, I could take it on.