[Nucleo_F401RE] Serial conneciton freezing constantly

Discussion and questions about boards that can run MicroPython but don't have a dedicated forum.
Target audience: Everyone interested in running MicroPython on other hardware.
Post Reply
AdamN
Posts: 1
Joined: Tue May 05, 2020 5:23 am

[Nucleo_F401RE] Serial conneciton freezing constantly

Post by AdamN » Tue May 05, 2020 9:06 pm

Hi,

I am having trouble with the virtual serial port of the nucleo. It seems to either be crashing or freezing every 5 minutes or so. Requiring a full power cycle to get it working again. The reset button on the board doesn't work when it's in the frozen state.

I have written short programs in the REPL, which seem to work ok for the time they're running, but once I stop them the board freezes almost immediately. I haven't written any proper programs for it yet as I want to fix this issue before spending time with a longer task.

Online
User avatar
dhylands
Posts: 3348
Joined: Mon Jan 06, 2014 6:08 pm
Location: Peachland, BC, Canada
Contact:

Re: [Nucleo_F401RE] Serial conneciton freezing constantly

Post by dhylands » Tue May 05, 2020 9:15 pm

If the reset button doesn't work, then it sounds like you have a hardware issue. There isn't anything that the software can do to override the behaviour of the reset button.

Post Reply