Hi all,
Not sure if it is off topic as it is not micropython related.
But I have a hard time finding how to power supply w600 pico outside from the micro usb port.
Any help appreciated as I find only output voltage pins.
Thanks
[W600 pico] Power supply
Re: [W600 pico] Power supply
At the board there is a pin labeled 5V. Using that pin and GND you can supply the board. Suitable input voltages are 3.6 - 6 V. Do not exceed 6V as that will damage the regulator,
Re: [W600 pico] Power supply
Thanks for this quick answer it clarify things !
(I was connecting it to my arduino and I noticed that arduino got power from this 5v pin so I got confused.)
(I was connecting it to my arduino and I noticed that arduino got power from this 5v pin so I got confused.)