Hi!
Did anyone already write a python module to drive such controller?
Thanks,
T6963C LCD Graphics Controller Chip
T6963C LCD Graphics Controller Chip
Frédéric
-
- Posts: 463
- Joined: Wed Apr 08, 2015 5:19 am
Re: T6963C LCD Graphics Controller Chip
I don't have a Python library, but there are several C/C++ libraries for the AVR/Arduino, e.g. this one:
http://en.radzio.dxp.pl/t6963/
or this one:
https://code.google.com/p/arduino-t6963c/
Shouldn't be too difficult to adapt them to MicroPython and the PyBoard/stmhal. T6963c-based displays need many data and control lines, though, so it might be better to use some sort of I/O expander
http://en.radzio.dxp.pl/t6963/
or this one:
https://code.google.com/p/arduino-t6963c/
Shouldn't be too difficult to adapt them to MicroPython and the PyBoard/stmhal. T6963c-based displays need many data and control lines, though, so it might be better to use some sort of I/O expander
Re: T6963C LCD Graphics Controller Chip
Yes, I know these projects; I'm working on the Arduino library, to clean it up. Then I will start to port it to micropython.
The idea is to dedicate a pyboard as a LCD interface, to build some sort of VT100 terminal.
The idea is to dedicate a pyboard as a LCD interface, to build some sort of VT100 terminal.
Frédéric