Hello Everyone!!
I have been trying to find out a 9DOF IMU to interface with the Pyboard(V1.1) that I have been playing around and planning to give a try on BMI160 IMU from Bosch. Has anyone given a try so far with this or any kind of 9DOF IMUs?
I am planning to use this library https://github.com/micropython-IMU/micropython-fusion by Peterhinch.
Thanks in advance!!
BMI160 9DOF IMU with pyboardV11
BMI160 9DOF IMU with pyboardV11
lnsri22 ![Smile :)](./images/smilies/icon_e_smile.gif)
![Smile :)](./images/smilies/icon_e_smile.gif)
Re: BMI160 9DOF IMU with pyboardV11
I used the 9DOF sensor on the SenseHat and managed to use it together with peters fusion library that you have linked.
viewtopic.php?f=5&t=1693
viewtopic.php?f=5&t=1693
Re: BMI160 9DOF IMU with pyboardV11
Thank you so much for getting back so quick!!
That was pretty interesting
.
I have been looking to use the IMU part alone. I may even use the env sensor later.
Would you be able to suggest on any break-out boards to start off with ??
That was pretty interesting
![Razz :P](./images/smilies/icon_razz.gif)
I have been looking to use the IMU part alone. I may even use the env sensor later.
Would you be able to suggest on any break-out boards to start off with ??
lnsri22 ![Smile :)](./images/smilies/icon_e_smile.gif)
![Smile :)](./images/smilies/icon_e_smile.gif)
Re: BMI160 9DOF IMU with pyboardV11
Do you mean with the bosch sensor? No I cant give recommendations there.
The SenseHat though is great value for getting things to work quickly. It may be a bit big though.
I‘m not sure if the lsm9ds1 sensor from ST on the SenseHat is a bit outdated now since the board has been around for some time. You might check ST website for some eval kits on follow up models.
A breakout board for the ST sensor is still available https://www.st.com/content/st_com/en/pr ... 159v1.html
for around 15$
The SenseHat though is great value for getting things to work quickly. It may be a bit big though.
I‘m not sure if the lsm9ds1 sensor from ST on the SenseHat is a bit outdated now since the board has been around for some time. You might check ST website for some eval kits on follow up models.
A breakout board for the ST sensor is still available https://www.st.com/content/st_com/en/pr ... 159v1.html
for around 15$
Re: BMI160 9DOF IMU with pyboardV11
Thanks for the reply there!!
Will give a try and let you know![Very Happy :D](./images/smilies/icon_e_biggrin.gif)
Will give a try and let you know
![Very Happy :D](./images/smilies/icon_e_biggrin.gif)
lnsri22 ![Smile :)](./images/smilies/icon_e_smile.gif)
![Smile :)](./images/smilies/icon_e_smile.gif)
-
- Posts: 847
- Joined: Mon Nov 20, 2017 10:18 am
Re: BMI160 9DOF IMU with pyboardV11
I mainly use the very popular MPU9250, it has both become very cheap and a recognized as 1 of the best performing IMUs
Re: BMI160 9DOF IMU with pyboardV11
Thanks OutoftheBOTS_ for the suggestion!!
Will take a look and get back![Smile :)](./images/smilies/icon_e_smile.gif)
Will take a look and get back
![Smile :)](./images/smilies/icon_e_smile.gif)
lnsri22 ![Smile :)](./images/smilies/icon_e_smile.gif)
![Smile :)](./images/smilies/icon_e_smile.gif)
Re: BMI160 9DOF IMU with pyboardV11
Hi. I am actually working with a couple of BMI160. At this moment, I am just understand the raw acceleration values, rest to code the calibration.
This is the first time I learn how work a IC from zero and I am served with this complexity.
Who write own BMI160 library? Thanks.
This is the first time I learn how work a IC from zero and I am served with this complexity.
Who write own BMI160 library? Thanks.