Having an issue getting the lib for the SSD1306 working

Discussion about programs, libraries and tools that work with MicroPython. Mostly these are provided by a third party.
Target audience: All users and developers of MicroPython.
Post Reply
holdenweb
Posts: 10
Joined: Wed Mar 09, 2016 12:40 pm

Re: Having an issue getting the lib for the SSD1306 working

Post by holdenweb » Sat Aug 24, 2024 4:53 pm

The ENABLE in question is an input to the OLED display. If this input is not high (either by connecting it to a pin which you set to ON, or by using a 10k resistor to the 3.3v power line) the device won't respond to commands.
Top
Post Reply

Return to “Programs, Libraries and Tools”