It is rollup of a fairly major fix for Windows terminal code-handling to translate input events received by the board, as well as some Windows 10-specific mode-setting logic which makes the console work properly since Windows 10 v1511 to handle received screen events on the client's side.
Thought it might be worth sharing given the issues around people successfully connecting and running a bug-free 'VT100' across platform, and be good to hear from people if it works for them.
I have republished the fixed version at https://github.com/vgkits/vgkits-vangua ... initerm.py until https://github.com/pyserial/pyserial/pull/351 gets considered or merged into PySerial.
If you have an ESP8266 board or any other running Micropython at 115200, this fixed version is already included in the latest vgkits-vanguard, so you should be able to test it out by just running
after installing the Vanguard tools following these instructions
Code: Select all
Alternatively you can replace your local serial/tools/miniterm.py file and use the instructions to use Miniterm direct following https://vgkits.org/blog/connecting-with-miniterm/