I've been flashing them with these arguments. Just want to make sure I'm not messing up from the get go or if doing it wrong will give me issues down the road.
Code: Select all
esptool.py --port COM3 write_flash --flash_size=4MB -fm dio 0 C:\Users\Main\Downloads\firmware-esp8266-GENERIC.bin
Code: Select all
-fm dout
The Teyleten flash_id shows this:
Code: Select all
esptool.py v3.0
Serial port COM3
Connecting....
Detecting chip type... ESP8266
Chip is ESP8266EX
Features: WiFi
Crystal is 26MHz
MAC: 98:cd:ac:25:bd:a9
Uploading stub...
Running stub...
Stub running...
Manufacturer: d8
Device: 4016
Detected flash size: 4MB
Hard resetting via RTS pin...