ESP8266 12E WangTongze Arduino Shield (moer)

All ESP8266 boards running MicroPython.
Official boards are the Adafruit Huzzah and Feather boards.
Target audience: MicroPython users with an ESP8266 board.
Post Reply
Posts: 1
Joined: Fri Jan 29, 2021 11:36 am

ESP8266 12E WangTongze Arduino Shield (moer)

Post by iura » Fri Jan 29, 2021 1:42 pm

Hi everyone!

Please pardon me if there is a topic here about 12E but I didn't found it.


I have uploaded esp8266-20200911-v1.13 firmware using ESP download tool ver 2.4. Now I am trying to connect to the shield using com-port via USB to TTL convertor. I have tried 9600 and 115200 baud with no flow control, but still useless. Just getting some weird symbols at connect and no response.

When I am using Thonny it writes:

Code: Select all

Device is busy or does not respond. Your options:

  - wait until it completes current work;
  - use Ctrl+C to interrupt current work;
  - use Stop/Restart to interrupt more and enter REPL.
At REPL command I get:

Code: Select all

WARNING:root:Unexpected echo. Expected b'REPL\r\n', got b''

Post Reply