Hello
My first step are difficult !!!!
I use the IDE THONNY , my board is "MakePython ESP32 development Kit)"
Now I can create program witch run well but i want to execute them STEP BY STEP or others commands
All these commands are gray out (not active)
Ctrl+F5
Shift6+F5
Ctrl+Shift+B
F6
F7
F8
Ctrl+F8
Ctrl+B
Ctrl+T
In tutorial it seems that theses commands are able to be actives . What can i do for activate theses commands ?
the only commands i can use are ( active) :
F5
Ctrl+F2
Ctrl+C
Ctrl+D
A very great thanks for all help
Best regards
THONNY EXECUTE STEP BY STEP ESP32
- aivarannamaa
- Posts: 171
- Joined: Fri Sep 22, 2017 3:19 pm
- Location: Estonia
- Contact:
Re: THONNY EXECUTE STEP BY STEP ESP32
Step-by-step debugging is available only for CPython, not for MicroPython or CircuitPython.
Aivar Annamaa
https://thonny.org
https://thonny.org
Re: THONNY EXECUTE STEP BY STEP ESP32
Hello thanks for answer , unfortunately .... it's a great help
Very happy for your help !
Best regards
Very happy for your help !
Best regards