Page 1 of 3
My LoPy board arrived
Posted: Tue Oct 18, 2016 10:03 am
by bmarkus
Just received my LoPy board. It would be good to have a dedicated subforum for LoPy talks.
Re: My LoPy board arrived
Posted: Tue Oct 18, 2016 11:34 am
by rcolistete
2x for a LoPy section in this forum, like the one for WiPy.
Please, measure the free RAM after login (or reset) with :
Code: Select all
import micropython
micropython.mem_info()
or :
and share with us.
Re: My LoPy board arrived
Posted: Tue Oct 18, 2016 11:59 am
by deshipu
I think they could be added to the WiPy section? They are going to have a lot in common, probably.
Re: My LoPy board arrived
Posted: Tue Oct 18, 2016 12:40 pm
by Frida
rcolistete wrote:2x for a LoPy section in this forum, like the one for WiPy.
Please, measure the free RAM after login (or reset) with :
Code: Select all
import micropython
micropython.mem_info()
or :
and share with us.
Code: Select all
>>>
>>> import micropython
>>> micropython.mem_info()
stack: 3221402640
GC: total: 192064, used: 1312, free: 190752
No. of 1-blocks: 16, 2-blocks: 6, max blk sz: 16, max free sz: 11912
>>> import gc
>>> gc.
__name__ collect disable enable
isenabled mem_free mem_alloc threshold
>>> gc.mem_free()
190592
>>>
Re: My LoPy board arrived
Posted: Tue Oct 18, 2016 2:14 pm
by pfalcon
It would be good to have a dedicated subforum for LoPy talks.
Pycon created dedicated forum on their site, so I don't think it would be friendly action to create a section here, unless there will be *really* many people who want to talk about LoPy on this forum and not on that. In the meantime, as pointed, WiPy forum should be the best place for related topics.
Re: My LoPy board arrived
Posted: Tue Oct 18, 2016 2:17 pm
by pfalcon
Frida wrote:
stack: 3221402640
Funny. Is that out-of-the-package, or after firmware update as recommended? Try running following code:
The most interesting is however what version of MicroPython it's based on - what header does it print after reset?
Re: My LoPy board arrived
Posted: Tue Oct 18, 2016 2:55 pm
by kamikaze
I would care about people not about enterprise "friendship" ) if people will want to go to Pycom forum - they will ) but yes... it is worth to create yet another section if there are many of such board users that create meaningful topics )
Re: My LoPy board arrived
Posted: Tue Oct 18, 2016 3:38 pm
by rcolistete
pfalcon wrote:It would be good to have a dedicated subforum for LoPy talks.
Pycon created dedicated forum on their site, so I don't think it would be friendly action to create a section here, unless there will be *really* many people who want to talk about LoPy on this forum and not on that. In the meantime, as pointed, WiPy forum should be the best place for related topics.
LoPy is the 1st MCU board with MicroPython & LoRa, has some thousands of buyers (Kickstarters backers). Many MicroPython users are owners of Pybord, WiPy, ESP8266, LoPy, etc, because all of these boards have strenghts for some use cases.
IMHO, it is nonsense to try to hide one of two great MicroPython 2016 announcements (ESP8266 with MicroPython & LoPy in January/February 2016) from the MicroPython community.
Because more MicroPython users using with more boards, better is for the MicroPython community (which is very small compared to Arduino, etc).
One option is to rename de WiPy section to "WiPy and LoPy", covering WiPy 1.0, WiPy 2.0 and LoPy. WiPy 2.0 and LoPy share many features.
Re: My LoPy board arrived
Posted: Tue Oct 18, 2016 3:57 pm
by pfalcon
rcolistete wrote:
IMHO, it is nonsense to try to hide one of two great MicroPython 2016 announcements (ESP8266 with MicroPython & LoPy in January/February 2016) from the MicroPython community.
Then you must have been sitting under the rock, because everyone on this forum knew about that yet in January/February:
http://forum.micropython.org/viewtopic.php?f=8&t=1350 .
However, if LoPy creators decided to create their own forum, it's their right, and owners of this forum hopefully won't try to proactively interfere with their desire to consolidate "their" users. This forum remains about all things MicroPython, and if practice shows that there's considerable share of LoPy, etc. users on this forum in 6-12 month, a dedicated section specifically for them will be explicitly designated.
Re: My LoPy board arrived
Posted: Tue Oct 18, 2016 4:13 pm
by kamikaze
but what would you fill separate LoPy section with? What tips'n'tricks, questions etc. would you write there? And how much? I think it's a good starting point - to start from "Others boards" and if there will be a lot of meaningful LoPy topics - then it is worth to create a separate section even if there are 2-3 active users. For me it's more about content (which could be found by Google btw), not about user count.