First thing I noticed is my clone and build scripts no longer work due to the new "ports" folder in the build path, but that is fixed and all is updated and built.
But now my flash scripts for the esp32 thing don't work either, it appears to flash sucessfully, but I get dropped back to the command interpreter and python is not running !
Yes I am erasing the chip first and here's my flash settings:
Code: Select all
esptool.py --chip esp32 --port /dev/tty.usbserial-DN02N7EB --baud 460800 write_flash --compress -fs 4MB -fm dio 0x0 latest.bin
Code: Select all
rst:0x10 (RTCWDT_RTC_RESET),boot:0x13 (SPI_FAST_FLASH_BOOT)
flash read err, 1000
Falling back to built-in command interpreter.