MicroPython Forum (Archive)

The m5stack camera is based on the espressif camera using the ova sensor however the default firmware only allows users to access the camera in AP mode.
Is there working firmware that allows the camera to work in ST mode?
I tried asking on the M5Stack forums but I'm not getting anywhere.
The module has so much potential but the current firmware is holding it back.

I have one here.

I only found:

• https://github.com/namato/micropython-ov2640
• https://github.com/FunPythonEC/OV2640_uPy

both didn't work

Seems the specs are here: https://docs.m5stack.com/#/en/unit/m5camera
I created https://github.com/m5stack/M5Stack_Micr ... /issues/11