MicroPython Forum (Archive)

Posted: **Mon Jan 25, 2021 3:58 pm**

Hello to all,
my environment:
Hardware:
ESP32 Wroom-32
1.8 TFT SPI 128x160 V1.1

Software:
micropython v1.13 on 2020-09-02
ST7735 https://github.com/boochow/MicroPython-ST7735

My problem:
I want to display the output in landscape mode instead of portrait mode.

My question:
Is this possible?
If so, how can I achieve this with the above environment?

Thanks for your help and tips.
Until then ...
MfG
Günter

P.S.
I am not a native speaker

Posted: **Mon Jan 25, 2021 5:28 pm**

See the nano-gui drivers here.

Posted: **Thu Jan 02, 2025 5:48 pm**

Hello,

are there any news about an actuell ST7735 Driver with several fonts and fontsizes.

Regards
Alexander

Posted: **Thu Jan 02, 2025 6:00 pm**

This forum in not active any more. Please post at Github discussions: https://github.com/orgs/micropython/discussions.

MicroPython Forum (Archive)

Changing from portrait mode to landscape mode with ST7735

Changing from portrait mode to landscape mode with ST7735

Re: Changing from portrait mode to landscape mode with ST7735

Re: Changing from portrait mode to landscape mode with ST7735

Re: Changing from portrait mode to landscape mode with ST7735