I've tried just using the ifconfig that's returned from ifconfig if I start wlan in AP mode with no config...
Code: Select all
wlan.ifconfig( ('192.168.4.1', '255.255.255.0', '192.168.4.1', '0.0.0.0') )
Code: Select all
wlan.ifconfig(config=('192.168.4.1', '255.255.255.0', '192.168.4.1', '0.0.0.0') )
Code: Select all
wlan.ifconfig(0, ('192.168.4.1', '255.255.255.0', '192.168.4.1', '0.0.0.0') )
Code: Select all
TCP/IP Invalid Parameters