I am looking to add an Ethernet interface to my MP based product. I am currently using a 32F411 and serial over USB for comms.
I would ideally like to use a different ST MCU with native Ethernet support so have been looking at 32F407 for example.
For me, this would be a cleaner solution than using an SPI connection to a WizNet 5500, for example.
I would be interested in people’s views on how they have approached this situation previously.
Adding an Ethernet Interface
Re: Adding an Ethernet Interface
Would anyone have any views on this?
Re: Adding an Ethernet Interface
I connected an ethernet port to a PyBoard at one point, but I did it with a WizNet. As I recall, it worked perfectly. I actually got a second WizNet device after that, a different model. I can't remember what the difference or purported advantage of the second model was. I never got around to wiring it up.
As your question pertaining to alternative approaches, I have no input. Sorry. Just responding to say the WizNet worked fine when I tested it.
As your question pertaining to alternative approaches, I have no input. Sorry. Just responding to say the WizNet worked fine when I tested it.
Re: Adding an Ethernet Interface
Thanks Kwiley - I am looking into the Wiznet solution as well. Thanks for your comments