Hi,
Is there a way to determine the Modules in a given microPython firmware distribution (i.e. 512K, 1M, 2M)?
Mickey
Listing Modules
Re: Listing Modules
help(“modules”)
Re: Listing Modules
Roberthh,
Thanks!
I knew about the Help("Modules") command, but I wasn't sure it would work with the firmware distributions. I assume that if the firmware is loaded on an ESP-01 (ESP8266), the ESP-01 must be connected to some IDE such as Thonny to query with the Help command.
As the ESP-01S I'm using has 1M of Flash, I wanted to use the 512K distribution to allow memory space for the application. However, I wanted to be sure that the 512K distribution had the functionality I required.
BTW: Do you know if there's a listing of installed modules for each firmware distribution on some website? If a listing is available I won't need to flash a ESP-01S to confirm modules.
Mickey
Thanks!
I knew about the Help("Modules") command, but I wasn't sure it would work with the firmware distributions. I assume that if the firmware is loaded on an ESP-01 (ESP8266), the ESP-01 must be connected to some IDE such as Thonny to query with the Help command.
As the ESP-01S I'm using has 1M of Flash, I wanted to use the 512K distribution to allow memory space for the application. However, I wanted to be sure that the 512K distribution had the functionality I required.
BTW: Do you know if there's a listing of installed modules for each firmware distribution on some website? If a listing is available I won't need to flash a ESP-01S to confirm modules.
Mickey
Re: Listing Modules
The source should be mpconfigport.h, https://github.com/micropython/micropyt ... nfigport.h
It shows the settings shared by all ESP8266 port variants. There are boards specific additions in boards/<board_nam>/mpconfigboard.h.
The default settings are in py/mpconfig.py
It shows the settings shared by all ESP8266 port variants. There are boards specific additions in boards/<board_nam>/mpconfigboard.h.
The default settings are in py/mpconfig.py
Re: Listing Modules
Thanks again!
I'm surprised that no one has simply posted the output of the Help("modules") command for the various firmware distributions.
Mickey
I'm surprised that no one has simply posted the output of the Help("modules") command for the various firmware distributions.
Mickey