Any experience with the Atmel ATWINC1500 WiFi module

General discussions and questions abound development of code with MicroPython that is not hardware specific.
Target audience: MicroPython Users.
slzatz
Posts: 58
Joined: Mon Feb 09, 2015 1:09 am

Any experience with the Atmel ATWINC1500 WiFi module

Postby slzatz » Sun Jan 24, 2016 11:22 pm

My experience trying to get the pyboard to work consistently with the cc3000 was not a happy one, although I haven't tried to revisit that in several months. I am wondering if anyone has any experience with the Atmel ATWINC1500 WiFi Module either in relation to the pyboard or not. In any event, will probably purchase this board from Adafruit https://www.adafruit.com/products/2999 but any thoughts as to whether there should be any issues pairing it with the pyboard would be helpful. Thanks.

jpj
Posts: 55
Joined: Sat Dec 10, 2016 3:07 pm

Re: Any experience with the Atmel ATWINC1500 WiFi module

Postby jpj » Sun Jan 08, 2017 10:47 pm

Hi,

Did you ever get the ATWINC1500 working with the Pyboard? I've been contemplating a wifi solution for my Pyboard v1.1.

Thanks,
J

slzatz
Posts: 58
Joined: Mon Feb 09, 2015 1:09 am

Re: Any experience with the Atmel ATWINC1500 WiFi module

Postby slzatz » Sun Jan 08, 2017 11:26 pm

Did you ever get the ATWINC1500 working with the Pyboard? I've been contemplating a wifi solution for my Pyboard v1.1

Never tried. With the ESP8266 available, that's what I've been using when I need WiFi connectivity. Admittedly not the equivalent of the pyboard but performance has been adequate for my purposes.

jpj
Posts: 55
Joined: Sat Dec 10, 2016 3:07 pm

Re: Any experience with the Atmel ATWINC1500 WiFi module

Postby jpj » Sun Jan 08, 2017 11:43 pm

Thanks.

Anyone tried the ATWINC1500? I'm wondering if the drivers built into the downloadable firmware (section Suitable for PYBv1.1 boards, with network drivers for CC3000 and WIZ820io included:) may be compatible with the C1500.

https://www.adafruit.com/products/2999

mischko
Posts: 15
Joined: Tue Feb 03, 2015 12:32 am

Re: Any experience with the Atmel ATWINC1500 WiFi module

Postby mischko » Sun Mar 12, 2017 3:36 am

I also would like to get a good wifi module working with a PyBoard.

Anyone have this working?


Return to “General Discussion and Questions”

Who is online

Users browsing this forum: No registered users and 4 guests