Ok. Has the terminal program settings for flow control, which could be set to none?
b.t.w.: which terminal programndo you use? For convenience I use picocom. screen seemed overfeatured for my purpose.
[Solved] Can't access REPL on macOS - Works on Windows
Re: Can't access REPL on macOS - Works on Windows
I.... think I found a solution I can work with.
None of the different terminal programs I tried were working... but I just now installed the MicroPython plugin for PyCharm - and that works! I can access REPL and I can upload files through it.
But, when I start REPL I get a lot of garbage first before the prompt appears. I don't think that should happen?
It seems to work normal after that so I can ignore it I guess... but still would be nice to fix that
None of the different terminal programs I tried were working... but I just now installed the MicroPython plugin for PyCharm - and that works! I can access REPL and I can upload files through it.
But, when I start REPL I get a lot of garbage first before the prompt appears. I don't think that should happen?
It seems to work normal after that so I can ignore it I guess... but still would be nice to fix that
Code: Select all
Device path /dev/tty.Repleo-CH341-001314FD
Quit: Ctrl+] | Stop program: Ctrl+C | Reset: Ctrl+D
Type 'help()' (without the quotes) then press ENTER.
{$d��|�l�|
�l�
#<����r�b�
b��go�$go���
cp��d{l{lx�o�
�
d
cg�|�l$
c��go�$��d`�o
�$or�ۓo
c
d`p�'�
r�����
b
n�<l$
c��'o��l �n
$`o;�ۓo
�$�dp�'�
;������s�
#
n�<��
b��go�
$`�n
�$or�ۓold`;��'
␍┌ ��
␍��<��π⎼┼␌��┌
␉�$
␌��ܜ��$�␌�┌⎼␍ll��|��;so#��ld�d
c��c��ܜ�#�
c��ds$�l��|��{gb��l��c�
c䌜���c�l#d���'�;��'|�lldl c��|;�d�'��o�l`��s�l�l�
l`��s�l�l
l`��r�l���
dl {l��r$���c
��#|l#��#<����
dl#��o�o��lg�
�
�
$�l$���
l`�g�����c
$l䌏c���c
d
�csdsds�'����c�;�l�x�d��
�x���d�c��g�߀�c��{�$�x�l���x���ds$�l��|��{gb��
�����c�
c䌜��<��cd
dcl��l'�d`Ãdo�x{l�l��|��;gc��
�#5 ets_task(40100130, 3, 3fff83ec, 4)
WebREPL daemon started on ws://192.168.4.1:8266
WebREPL daemon started on ws://0.0.0.0:8266
Started webrepl in normal mode
MicroPython v1.9.4-8-ga9a3caad0 on 2018-05-11; ESP module with ESP8266
Type "help()" for more information.
>>>
Re: Can't access REPL on macOS - Works on Windows
The garbage at the startup is normal. The ESP8266 boot ROM send it first messages at a baud rate of about 74800 baud.
Re: Can't access REPL on macOS - Works on Windows
Ah good to know - thank you very much! Then I guess this thread can be seen as solved