Prototyping board with 20-pin mezzanine plug/s
Posted: Sat Jun 01, 2019 1:50 am
I am new in here, so forgive me if this has been raised previously.
Armed with a PYB-D, WBUS-DIP68 and a few other bits and pieces, I am enjoying the PYB D series 'system'.. so far it seems well thought out and geared towards more complex product development. I have successfully ported a couple of previous projects to the Pyb D, which is more accurate, more stable and less prone to obscure issues than the platform I used previously. It has meant adopting some other 3rd party devices, but that has gone quite easily so far. Now I want to add some other functionality and the WBUS-DIP68 looks like a very good way to accommodate this, rather than have two separate devices tied together.
Do my question is, is there a 'Prototyping' board to fit the 'mezzanine' sockets on the WBUS-DIP68 / WBUS-DIP28 in the development road-map, or already available from somewhere? I would like to develop some custom sensors that would plug into these sockets eventually. At present I am working on the sensors using the WBUS-DIPXX boards into a breadboard, but that becomes quite a briar patch . So I can see that adding multiple sensors (i.e. multipe gas sensors) via extending the signals on the mezzanine ports would be useful with a separate, isolated, power supply for the high current component such as element heating, of some of the sensors.
if there is nothing like this planned, or available then I might have to design one up. Any help/comment would be appreciated..
Armed with a PYB-D, WBUS-DIP68 and a few other bits and pieces, I am enjoying the PYB D series 'system'.. so far it seems well thought out and geared towards more complex product development. I have successfully ported a couple of previous projects to the Pyb D, which is more accurate, more stable and less prone to obscure issues than the platform I used previously. It has meant adopting some other 3rd party devices, but that has gone quite easily so far. Now I want to add some other functionality and the WBUS-DIP68 looks like a very good way to accommodate this, rather than have two separate devices tied together.
Do my question is, is there a 'Prototyping' board to fit the 'mezzanine' sockets on the WBUS-DIP68 / WBUS-DIP28 in the development road-map, or already available from somewhere? I would like to develop some custom sensors that would plug into these sockets eventually. At present I am working on the sensors using the WBUS-DIPXX boards into a breadboard, but that becomes quite a briar patch . So I can see that adding multiple sensors (i.e. multipe gas sensors) via extending the signals on the mezzanine ports would be useful with a separate, isolated, power supply for the high current component such as element heating, of some of the sensors.
if there is nothing like this planned, or available then I might have to design one up. Any help/comment would be appreciated..