PYBv1.1 with LCD32MKv1.0 LCD Touch Skin

The official pyboard running MicroPython.
This is the reference design and main target board for MicroPython.
You can buy one at the store.
Target audience: Users with a pyboard.
Post Reply
Posts: 5
Joined: Tue Aug 30, 2016 7:15 pm

PYBv1.1 with LCD32MKv1.0 LCD Touch Skin

Post by PhilG1300 » Tue Aug 30, 2016 7:21 pm

I have just ordered a PyBv1.1 and a LCD Touch skin. I have one question. It suggests in the documentation that the LCD board can be mounted in two ways. The 'X' way covers the servo connections on the PyBv1.1. Can I mount it in the 'Y' way and use the servo connections for controlling a servo?

Posts: 348
Joined: Fri May 02, 2014 3:43 pm
Location: Massachusetts, USA

Re: PYBv1.1 with LCD32MKv1.0 LCD Touch Skin

Post by blmorris » Tue Aug 30, 2016 8:32 pm

Yes, you should be able to use the LCD skin in the 'Y' position and leave the servo pins free for a servo. Just note that the 'Y' position is rotated 180 degrees relative to the 'X' position.


Post Reply