MicroPython Forum (Archive)

Hi
I have just ordered a PyBv1.1 and a LCD Touch skin. I have one question. It suggests in the documentation that the LCD board can be mounted in two ways. The 'X' way covers the servo connections on the PyBv1.1. Can I mount it in the 'Y' way and use the servo connections for controlling a servo?
Regards
Phil.

Yes, you should be able to use the LCD skin in the 'Y' position and leave the servo pins free for a servo. Just note that the 'Y' position is rotated 180 degrees relative to the 'X' position.

-Bryan