Ethernet Adapter for PyBoard Which?
Ethernet Adapter for PyBoard Which?
I am looking to add ethernet to my pyboard but not 100% sure which is the best compatible wise. It shows in the docs Wiznet 5200/5500 based chips.
I was wondering if this one would work fine?
WIZ550IO from digikey
http://www.digikey.com/product-detail/e ... ND/4425703
There was also this one
WIZnet W5100 Network Module with Mag Jack - WIZ811MJ from sparkfun
https://www.sparkfun.com/products/9473
Thanks!
I was wondering if this one would work fine?
WIZ550IO from digikey
http://www.digikey.com/product-detail/e ... ND/4425703
There was also this one
WIZnet W5100 Network Module with Mag Jack - WIZ811MJ from sparkfun
https://www.sparkfun.com/products/9473
Thanks!
Re: Ethernet Adapter for PyBoard Which?
I think that only the 5100 is currently supported.
Re: Ethernet Adapter for PyBoard Which?
Hmmm alright is there any where to confirm for sure, didnt want to waste $50 haha then have issues getting it running. I see in the docs it just says this :
This class allows you to control WIZnet5x00 Ethernet adaptors based on the W5200 and W5500 chipsets (only W5200 tested).
Thanks again.
This class allows you to control WIZnet5x00 Ethernet adaptors based on the W5200 and W5500 chipsets (only W5200 tested).
Thanks again.
Re: Ethernet Adapter for PyBoard Which?
Sorry - it looks like 5200 (not 5100) is what's supported.
https://github.com/micropython/micropyt ... conf.h#L59
I started playing with the 5500, since I have a dev board with the 5500 on it, but it didn't seem to be as simple as changing the 5200 to 5500. Someday, I'll get back to it.
https://github.com/micropython/micropyt ... conf.h#L59
I started playing with the 5500, since I have a dev board with the 5500 on it, but it didn't seem to be as simple as changing the 5200 to 5500. Someday, I'll get back to it.
Re: Ethernet Adapter for PyBoard Which?
Thanks very much! Any idea where I can buy a 5200 adapter or a variant ? cant seem to find any available on digi or sparkfun.
Scratch that I found it on digikey there search is so convoluted its impossible to find things sometimes.
Scratch that I found it on digikey there search is so convoluted its impossible to find things sometimes.
Re: Ethernet Adapter for PyBoard Which?
Which board did you end up buying? And how did the connection & driver support go?amano001 wrote:Thanks very much! Any idea where I can buy a 5200 adapter or a variant ? cant seem to find any available on digi or sparkfun.
Scratch that I found it on digikey there search is so convoluted its impossible to find things sometimes.
Last edited by tehfink on Tue Oct 25, 2016 3:35 pm, edited 1 time in total.
Re: Ethernet Adapter for PyBoard Which?
FWIW, I've hooked up a WIZ820IO to my PyBoard without any issues.
It has magnetics included.
Got it from TME for € 22,00 earlier this year.
It has magnetics included.
Got it from TME for € 22,00 earlier this year.
Re: Ethernet Adapter for PyBoard Which?
Cool, thanks for the reply. Any thoughts on ease of hookup, stability, and dependability?HansvL wrote:FWIW, I've hooked up a WIZ820IO to my PyBoard without any issues.
It has magnetics included.
Got it from TME for € 22,00 earlier this year.
Re: Ethernet Adapter for PyBoard Which?
Well, I installed the proper firmware and followed the examples for the network module. Mine is hooked up as
nic = network.WIZNET5K(pyb.SPI(1), pyb.Pin.board.X5, pyb.Pin.board.X4)
My PyBoard reads several sensors and uses a simple http GET to post data to my server, 10 times per hour. It has been doing that non-stop since mid May and hasn't missed a beat. I intend to implement a watchdog timer but so far the board hasn't failed. So for my (hobby) purpose, it is quite stable enough.
Not sure what you mean by dependability.
nic = network.WIZNET5K(pyb.SPI(1), pyb.Pin.board.X5, pyb.Pin.board.X4)
My PyBoard reads several sensors and uses a simple http GET to post data to my server, 10 times per hour. It has been doing that non-stop since mid May and hasn't missed a beat. I intend to implement a watchdog timer but so far the board hasn't failed. So for my (hobby) purpose, it is quite stable enough.
Not sure what you mean by dependability.
Re: Ethernet Adapter for PyBoard Which?
Yep, w5500 is not working. Did you made any progress?dhylands wrote:Sorry - it looks like 5200 (not 5100) is what's supported.
https://github.com/micropython/micropyt ... conf.h#L59
I started playing with the 5500, since I have a dev board with the 5500 on it, but it didn't seem to be as simple as changing the 5200 to 5500. Someday, I'll get back to it.