Hi,
suddenly the boot.py and another file that I was testing with the pyboard have a size of 0 bytes and I can't delete or overwrite .
If i detele the files apparently the files are delete but at the first connection of pyboard they appears again.
If I try to overwrite the files i got a message that files are cotrrupted.
I've also reloaded the last firmware without success.
Any suggestion ?
Can I "format" the PYBFLAH as any other disk ?
Thanks Roberto
Can't delete some files from pyBoard
Can't delete some files from pyBoard
Thanks. Roberto
Re: Can't delete some files from pyBoard
Really any suggestion ?
Does it mean that I've lost the board ?
Does it mean that I've lost the board ?
Thanks. Roberto
Re: Can't delete some files from pyBoard
Please try a Filesystem reset by initiating boot mode 3 as described in the docs...
http://docs.micropython.org/en/latest/p ... boot-modes
That should reset the filesystem and tell us more about the hardware health of your pyboard.
http://docs.micropython.org/en/latest/p ... boot-modes
That should reset the filesystem and tell us more about the hardware health of your pyboard.
Re: Can't delete some files from pyBoard
Hi kfricke,
Thanks !!
I followed the procedure with usb connect without solve ,then I've repeated with board connect to a power bank and fixed the problem.
Is the first time that I use the pyBoard connected to w10 laptop and I'm facing some strange beaviors with more than one pyBoard.
Sometime the board isn't recognised as usb disk so I've to disinstall the serial device from w10 control panel and then connecting again
the board is't fixed.
I think that doing this operation last time something goes wrong.
Thanks again.
Roberto.
Thanks !!
I followed the procedure with usb connect without solve ,then I've repeated with board connect to a power bank and fixed the problem.
Is the first time that I use the pyBoard connected to w10 laptop and I'm facing some strange beaviors with more than one pyBoard.
Sometime the board isn't recognised as usb disk so I've to disinstall the serial device from w10 control panel and then connecting again
the board is't fixed.
I think that doing this operation last time something goes wrong.
Thanks again.
Roberto.
Thanks. Roberto
Re: Can't delete some files from pyBoard
You are welcome. It seems to be some power related issues on the USB port of your laptop. Maybe you should check the comsumers you have connected or calculate the total power drawed. Good luck further down this road!