Pyboard + WIZ850io

The official pyboard running MicroPython.
This is the reference design and main target board for MicroPython.
You can buy one at the store.
Target audience: Users with a pyboard.
Post Reply
scardig
Posts: 20
Joined: Wed Jan 10, 2018 8:32 am

Pyboard + WIZ850io

Post by scardig » Thu Nov 01, 2018 9:52 am

Hello,

I'm using a Pyboard1.1 + a WIZ850io ethernet module. I installed a pyboard firmware with network module and followed instructions at:

http://docs.micropython.org/en/latest/l ... NET5K.html

but with no success, that is:

nic = network.WIZNET5K(pyb.SPI(1), pyb.Pin.board.X5, pyb.Pin.board.X4)
...ok with no error messages

nic.ifconfig(('192.168.0.4', '255.255.255.0', '192.168.0.1', '8.8.8.8'))
...ok with no error messages, but

nic.ifconfig()
returns ('0.0.0.0', '255.255.255.0', '0.0.0.0', '8.8.8.8')

if useful nic.regs()

Code: Select all

Wiz CREG:
  0000: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
  0010: 00 00 00 00 00 00 00 00 07 d0 08 28 00 00 00 00
  0020: 00 00 00 00 00 ff ff 00 00 00 00 00 00 bf 00 00
  0030: 00 00 00 00 00 00 78 25 04 00 00 00 00 00 00 00
  0040: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
Wiz SREG[0]:
  0000: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
  0010: 00 00 00 00 00 00 00 00 07 d0 08 28 00 00 00 00
  0020: 00 00 00 00 00 ff ff 00 00 00 00 00 00 bf 00 00
Wiz SREG[1]:
  0000: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
  0010: 00 00 00 00 00 00 00 00 07 d0 08 28 00 00 00 00
  0020: 00 00 00 00 00 ff ff 00 00 00 00 00 00 bf 00 00
Wiz SREG[2]:
  0000: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
  0010: 00 00 00 00 00 00 00 00 07 d0 08 28 00 00 00 00
  0020: 00 00 00 00 00 ff ff 00 00 00 00 00 00 bf 00 00
Wiz SREG[3]:
  0000: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
  0010: 00 00 00 00 00 00 00 00 07 d0 08 28 00 00 00 00
  0020: 00 00 00 00 00 ff ff 00 00 00 00 00 00 bf 00 00
  
What is wrong ? Maybe network module is only compatible with WIZ820io ?

Tnx

Post Reply