Page 1 of 1
DFU Util does not connect
Posted: Sat Nov 10, 2018 1:30 pm
by NikolaiE
I have put my Pyboard into dfu mode with connecting the pins. My device manager is showing up the stm32 in dfu mode, but dfu-util still can not connect.
Cannot open DFU device 0483:df11
Re: DFU Util does not connect
Posted: Sat Nov 10, 2018 1:55 pm
by Roberthh
You might not have the proper access rights. On Linux, try sudo, or/and look at that place:
https://github.com/micropython/micropyt ... /README.md or
https://github.com/micropython/micropyt ... are-Update
On Linux, you may add yourself (user name) to the dialout group.
Re: DFU Util does not connect
Posted: Sat Nov 10, 2018 2:11 pm
by NikolaiE
On linux i had no problems, i also thought its a win10 problem.
When I used DFUse from ST it worked on win10
Thank you.