Extended Length Socket Pins

The official pyboard running MicroPython.
This is the reference design and main target board for MicroPython.
You can buy one at the store.
Target audience: Users with a pyboard.
Post Reply
User avatar
RWLTOK
Posts: 17
Joined: Thu Dec 14, 2017 7:24 pm

Extended Length Socket Pins

Post by RWLTOK » Sun Aug 04, 2019 2:24 pm

I would like to use the PyBoard in a project where I plug it into a board that I am designing. I would like to know of a part number or manufacture that makes extended versions of the rounded socket pins that come with the PyBoard. I want to keep the option of adding shields to the PyBoard so I don't want to use square type pins. If anyone knows of a component, please reply.

Thanks

Rich

starter111
Posts: 31
Joined: Wed Mar 08, 2017 7:24 am

Re: Extended Length Socket Pins

Post by starter111 » Wed Aug 07, 2019 8:53 pm

I just did, isn't standard 0.100" (2.54mm) header??
I was using those.
https://www.digikey.com/product-detail/ ... ND/1094289
https://www.digikey.com/product-detail/ ... ND/1002538

User avatar
pythoncoder
Posts: 3496
Joined: Fri Jul 18, 2014 8:01 am
Location: UK
Contact:

Re: Extended Length Socket Pins

Post by pythoncoder » Thu Aug 08, 2019 7:01 am

Or are you after stackable headers?

I'm puzzled by the reference to "square" units. The headers supplied with Pyboards are turned pin headers which are regarded as high quality, but square pin headers work fine too. I have used them to enable a Pyboard to plug into sockets on a PCB while also enabling connections to be made from the component side.
Peter Hinch

Post Reply