[CLOSED] Custom Micropython build
Posted: Mon Dec 16, 2019 12:38 pm
[CLOSED] Windows Bash solved the issue.
Basically, I want to make my own changes in Micropython source code e.g. change pin of HW_LED_1 (one of four LEDs mounted to the board). I follow the instructions that are listed in README.md here: (https://github.com/micropython/micropyt ... orts/stm32)
So far I was able to:
- install Git
- install msys-make (as make path)
- install arm-none-eabi-gcc (as gcc path)
Now when I follow the instructions, almost every command I write returns error:
or
Instructions I tried:
make -C mpy-cross (in master)
make (in mpy-cross)
Also in ports/stm32 I get an error:
for four libraries (names respectively) that have to be updated
It seems that Git has no permissions or something. Any ideas will be helpful
My operating system - Windows 10
Build for - STM32F405 (PYBV11)
Basically, I want to make my own changes in Micropython source code e.g. change pin of HW_LED_1 (one of four LEDs mounted to the board). I follow the instructions that are listed in README.md here: (https://github.com/micropython/micropyt ... orts/stm32)
So far I was able to:
- install Git
- install msys-make (as make path)
- install arm-none-eabi-gcc (as gcc path)
Now when I follow the instructions, almost every command I write returns error:
Code: Select all
-Cannot openmake: *** [build/genhdr/mpversion.h] Error 1
Code: Select all
make: *** No children. Stop
make -C mpy-cross (in master)
make (in mpy-cross)
Also in ports/stm32 I get an error:
Code: Select all
error: pathspec '../../lib/lwip' did not match any file(s) known to git
It seems that Git has no permissions or something. Any ideas will be helpful
My operating system - Windows 10
Build for - STM32F405 (PYBV11)