hi,
i have testet the wifi c3000-module:
wlan.connect() - works
wlan.disconnect() - works
wlan.get_host() - works (e.g. ("tarnfleck.net") )
wlan.http_get() -works not (e.g. ("tarnfleck.net","index.htm") )
When is wlan installed usable in the official firmware (work on main.py)?
Wifi module
- polygontwist
- Posts: 36
- Joined: Sat Jun 28, 2014 4:54 pm
- Location: Germany, Rostock
- Contact:
Re: Wifi module
We have connected the CC3000 chip to the MicroPython board like described in the stmhal/cc3k/pybcc3k.c file and we are not able to connect to any network. We also get these messages:
pyb_cc3000_disable_irq: en=1 miss=1
pyb_cc3000_set_cs val=0
pyb_cc3000_enable_irq: en=0 miss=1
pyb_cc3000_enable_irq: handling missed IRQ
pyb_cc3000_set_cs val=1
pyb_cc3000_set_cs val=0
pyb_cc3000_pause_spi
pyb_cc3000_set_cs val=1
pyb_cc3000_resume_spi
Is there someone who can help with this issue? We're very interested if the missed IRQ has anything to do with it?
Regards
pyb_cc3000_disable_irq: en=1 miss=1
pyb_cc3000_set_cs val=0
pyb_cc3000_enable_irq: en=0 miss=1
pyb_cc3000_enable_irq: handling missed IRQ
pyb_cc3000_set_cs val=1
pyb_cc3000_set_cs val=0
pyb_cc3000_pause_spi
pyb_cc3000_set_cs val=1
pyb_cc3000_resume_spi
Is there someone who can help with this issue? We're very interested if the missed IRQ has anything to do with it?
Regards
Re: Wifi module
You may want to try the iabdalkader-cc3k-update branch. IIRC that was the working branch for wifi and it hasn't been merge to master yet.