Micropython Workshop in Zürich

Announcements and news related to MicroPython.
Online
User avatar
pythoncoder
Posts: 1960
Joined: Fri Jul 18, 2014 8:01 am

Re: Micropython Workshop in Zürich

Post by pythoncoder » Wed Aug 03, 2016 8:40 am

Useful information, especially the graphic showing the D1 Mini pinout.
Peter Hinch

User avatar
deshipu
Posts: 1219
Joined: Thu May 28, 2015 5:54 pm

Re: Micropython Workshop in Zürich

Post by deshipu » Wed Aug 03, 2016 8:58 am

pythoncoder wrote:Useful information, especially the graphic showing the D1 Mini pinout.
I actually prepared stickers that I plan to stick on the female headers on them. Should make it much easier to do connections.

Christian Walther
Posts: 9
Joined: Fri Aug 19, 2016 11:55 am

Re: Micropython Workshop in Zürich

Post by Christian Walther » Tue Aug 23, 2016 5:18 pm

Oh, how did I miss this! I should have started reading these forums earlier! :) Please be sure to post here again if you do a repeat, I would very much like to participate.

In fact I have been thinking about running a similar workshop at FabLab Winterthur, but focusing a bit more on Python and less on electronics, as that’s what I’m more familiar with. But I won’t have time for any preparation at least until the Zürich Mini Maker Faire (to which I just noticed you’re coming as well!). And lots of preparation will be necessary because I’m really a newbie to both MicroPython and the ESP8266. But your material should provide a nice starting point for that, thanks for making it public!

User avatar
deshipu
Posts: 1219
Joined: Thu May 28, 2015 5:54 pm

Re: Micropython Workshop in Zürich

Post by deshipu » Tue Aug 23, 2016 6:25 pm

I will be repeating the workshop for sure. The nearest one will be at the PyCon.PL conference (in Poland), but I'm sure there will be more workshops in Zurich.

SpotlightKid
Posts: 222
Joined: Wed Apr 08, 2015 5:19 am

Re: Micropython Workshop in Zürich

Post by SpotlightKid » Wed Aug 24, 2016 11:03 am

I'm in the process of planning a MicroPython workshop too, in Cologne. But it probably won't happen before December / January.

I also recently gave a short (German) talk & demo on MicroPython:

http://forum.micropython.org/viewtopic.php?f=2&t=2303

Post Reply