I have add ST SensorTile kit support to micropython, REPL works fine, but LED (PG12) is not work. I will do more test soon.
ST SensorTile kit introduction:
http://www.stmicroelectronics.com.cn/co ... t01v1.html
ST SensorTile kit
-
- Posts: 24
- Joined: Mon Apr 27, 2015 8:25 am
Re: ST SensorTile kit
Nice job. Thanks!
Re: ST SensorTile kit
My first guess (as to why the LED isn't working) is that you need to enable the clock for PortG.
-
- Posts: 363
- Joined: Sun Apr 17, 2016 1:55 pm
Re: ST SensorTile kit
Yes, it need enable PortG clock, and VddIO2.dhylands wrote:My first guess (as to why the LED isn't working) is that you need to enable the clock for PortG.
Code: Select all
__HAL_RCC_SYSCFG_CLK_ENABLE();
__HAL_RCC_PWR_CLK_ENABLE();
__HAL_RCC_GPIOG_CLK_ENABLE();
HAL_PWREx_EnableVddIO2();
-
- Posts: 288
- Joined: Sun May 04, 2014 8:54 am
Re: ST SensorTile kit
The only company that has stock won't ship it to me because of US trade restrictions. Even ST themselves can't ship it to me because of that.
ST is an European company.
What the hell.
ST is an European company.
What the hell.
Re: ST SensorTile kit
I've found it in stock through Digikey.ca and mouser.com (I'm in Canada). The very bottom of this page (in the Sample & Buy section)
http://www.st.com/en/evaluation-tools/s ... t01v1.html also has a "Buy Direct" button and a "Distributor Availability" button. Clicking on the distributor availability shows 2 distributors in Europe with stock.
http://www.st.com/en/evaluation-tools/s ... t01v1.html also has a "Buy Direct" button and a "Distributor Availability" button. Clicking on the distributor availability shows 2 distributors in Europe with stock.