Before actually bothering to read any documentation , I decided to just connect it to my pyboard as described in the modcc3k.c source code and try the existing uPy network module for the CC3k to see if it would work.
Unsurprisingly, it didn't - I also put a logic analyzer on the SPI bus and found that only one byte was sent from the pyboard to the CC3100 board, then nothing.
Code: Select all
>>> import network
>>> cc3100 = network.CC3k(pyb.SPI(2), pyb.Pin.board.Y5, pyb.Pin.board.Y4, pyb.Pin.board.Y3)
Traceback (most recent call last):
File "<stdin>", line 1, in <module>
OSError: Failed to init wlan module
-Bryan